Morphological and thermal analyses of flexible polyurethane foams containing commercial calcium carbonate
PDF (English)

Palavras-chave

polyurethane
flexible foam
calcium carbonate

Como Citar

Sant’Anna, S. S., de Souza, D. A., Carvalho, C. de F., & Yoshida, M. I. (2008). Morphological and thermal analyses of flexible polyurethane foams containing commercial calcium carbonate. Eclética Química, 33(2), 55–60. https://doi.org/10.26850/1678-4618eqj.v33.2.2008.p55-60
  • Citations
  • CrossRef - Citation Indexes: 10
  • SciELO - Citation Indexes: 1
  • Scopus - Citation Indexes: 12
  • Usage
  • SciELO - Full Text Views: 9497
  • SciELO - Abstract Views: 670
  • Captures
  • Mendeley - Readers: 13
  • Mendeley - Readers: 5

Resumo

One filler often utilized in flexible polyurethane foams is calcium carbonate (CaCO3) because it is non-abrasiveness, non-toxicity and facilitated pigmentation. However, it is observed that the excess of commercial CaCO3 utilized in industry possibly causing permanent deformations and damaging the quality of the final product. The effect of different concentrations of commercial CaCO3, in flexible foams, was studied. Different concentrations of CaCO3 were used for the synthesis of flexible polyurethane foams, which were submitted to morphological and thermal analyses to verify the alterations provoked by the progressive introduction of this filler.
https://doi.org/10.26850/1678-4618eqj.v33.2.2008.p55-60
PDF (English)

Referências

C. Ligoure, M. Cloitre, C. Le Chatelier, F. Monti, L. Leibler,

Polymer 46(17) (2005) 6402.

G. Woods, The ICI Polyurethanes Book, Wiley, New York.,

nd.ed., 1990.

W. D. Callister, Materials Science and Engineering: An

Introduction, John Wiley & Sons, New York, 5th. ed , 2000.

R. C. R. Nunes, J. L. C. Fonseca, M. R. Pereira, Polym. Test. 19(1) (2000) 93.

P. Barma, M. B. Rhodes, R. Salovey, J. Appl. Phys. 49(10)

(1978) 4985.

M. Rabello, Aditivação de Polímeros, Artliber, São Paulo, 2000.

N. Rattanasom, T. Saowapark, C. Deeprasertkul, Polym.

Test. 26(3) (2007) 369.

C. G. Mothé, C. R. de Araujo, M. A. de Oliveira, M. I.

Yoshida, J. Therm. Anal. Calorim. 67(2) (2002) 305.

C. G. Mothé, C. R. de Araujo, Thermochim. Acta 357-

(14) (2000) 321.

W. Vilar, Química e Tecnologia de Poliuretanos, Vilar

Consultoria, Rio de Janeiro, 2nd.ed., 1998.

R. Neff, A. Adedeji, C. W. Macosko, A. J. Ryan, J. Polym.

Sci., Part B: Polym. Phys. 36(4) (1998) 573.

J. P. Armistead, G. L. Wilkes, R. B Turner, J. Appl. Polym.

Sci. 35(3) (1988) 601.

M. Shui, Appl. Surf. Sci. 220(1- 4) (2003) 359.

R. P. Singh, M. Zhang, D. J. Chan, J. Mater. Sci. 37(4)

(2002) 781.

R.M.N. Arib, S. M. Sapuan, M. M. H. M. Ahmad, M.T.

Paridah, H. M. D. Khairul Zaman, Materials and Design 27(5)

(2006) 391.

M. van der Schuur , E. van der Heide, J. Feijen, R. J.

Gaymans, Polymer 45(8) (2004) 2721.

Creative Commons License
Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.

Copyright (c) 2018 Eclética Química

Métricas

Visualizações em PDF
350
Jul 2008Jan 2009Jul 2009Jan 2010Jul 2010Jan 2011Jul 2011Jan 2012Jul 2012Jan 2013Jul 2013Jan 2014Jul 2014Jan 2015Jul 2015Jan 2016Jul 2016Jan 2017Jul 2017Jan 2018Jul 2018Jan 2019Jul 2019Jan 2020Jul 2020Jan 2021Jul 2021Jan 2022Jul 2022Jan 2023Jul 2023Jan 2024Jul 2024Jan 2025Jul 2025Jan 202640
|