Synthesis of chitosan/AC/Fe3O4 nanocomposite and its structural, magnetic, and heavy metal adsorption characteristics
PDF

Keywords

nanocomposite
chitosan/AC/Fe3O4
cubic inverse spinel
saturation magnetization
heavy metal Cr(III) adsorption

How to Cite

Febrianti, B. A., Pujiarti, H., Subadra, U. I., & Taufiq, A. (2026). Synthesis of chitosan/AC/Fe3O4 nanocomposite and its structural, magnetic, and heavy metal adsorption characteristics. Eclética Química, 51, e–1570. https://doi.org/10.26850/1678-4618.eq.v51.2026.e1570

Abstract

The chitosan/activated carbon (AC)/Fe3O4 nanocomposite has been successfully synthesized. The nanocomposite was then characterized to investigate its structural, magnetic, and heavy metal Cr(III) adsorption characteristics using XRD, SEM, FTIR, VSM, and ICP-OES. The chitosan/AC/Fe3O4 nanocomposite performed a single phase with a cubic inverse spinel structure with a lattice parameter and crystallite size of 8.38 ± 0.01 Å and 5.04 ± 0.09 nm, respectively. The SEM image showed that the morphology of chitosan/AC/Fe3O4 tended to be spherical with an average particle size of 51.4 ± 0.4 nm. The FTIR spectrum showed that the chitosan/AC/Fe3O4 nanocomposite exhibited the presence of a β-1,4-glycosidic bond at 858 cm–1 originating from chitosan. The C=C functional group and Fe-O bonds appeared at 1606 and 439–642 cm–1, indicating the presence of AC and Fe3O4. The chitosan/AC/Fe3O4 nanocomposite had superparamagnetic properties with a saturation magnetization value of 36.27 ± 0.05 emu/g. Furthermore, the chitosan/AC/Fe3O4 nanocomposite had a capacity and efficiency for Cr(III) adsorption of 13.95 mg/g and 27.88% at a contact time of 240 min, respectively.

https://doi.org/10.26850/1678-4618.eq.v51.2026.e1570
PDF

References

Ahmad, M.; Ahmed, S.; Ikram, S. Adsorption of Heavy Metal Ions: Role of Chitosan and Celulose for Water Treatment. Int. J. Pharmacogn. 2015, 2 (6), 280–289. https://doi.org/10.13040/IJPSR.0975-8232.IJP.2(6).280-89

Amjad, M.; Hussain, S.; Javed, K.; Khan, A. R.; Shahjahan, M. The Sources, Toxicity, Determination of Heavy Metals and Their Removal Techniques from Drinking Water. World J. Appl. Chem. 2020, 5 (2), 34–40. https://doi.org/10.11648/j.wjac.20200502.14

Bai, B.; Xu, X.; Li, C.; Xing, J.; Wang, H.; Suo, Y. Magnetic Fe3O4@Chitosan carbon microbeads: Removal of doxycycline from aqueous solutions through a fixed bed via sequential adsorption and heterogeneous fenton-like regeneration. J. Nanomater. 2018, 2018, 5296410, https://doi.org/10.1155/2018/5296410

Bernard, E.; Jimoh, A.; Obofoni Odigure, J. Heavy metals removal from industrial wastewater by activated carbon prepared from coconut shell. Res. J. Chem. Sci. 2013, 3 (8), 3–9.

Çavuşoğlu, F. C.; Akan, S.; Arı, E. A.; Çetinkaya, E.; Çolak, E.; Daştan, G. N.; Deniz, S.; Erdem, D.; Köksal, M.; Korkmaz, S.; Onsekiz, N.; Oruçoğlu, B.; Özkaya, D.; Uslu, H. B.; Ünal, Ç.; Yıldız, O.; Özkara-Aydınoğlu, Ş.; Bayazit, Ş. S. Preparation of magnetic activated carbon-chitosan nanocomposite for crystal violet adsorption. Korean J. Chem. Eng. 2019, 36 (11), 1915–1921. https://doi.org/10.1007/s11814-019-0377-9

Febrianti, N. S.; Taufiq, A.; Hidayat, A.; Mufti, N.; Subadra, S. U. I. Synthesis and Characterization of ZnFe2O4-PEG/RGO Nanocomposites as Lead Heavy Metal Adsorbents. Key Eng. Mater. 2023, 941, 155–163. https://doi.org/10.4028/p-d8u8p7

Gao, Y.; Yue, Q.; Gao, B.; Li, A. Insight into activated carbon from different kinds of chemical activating agents: A review. Sci. Total Environ. 2020, 746, 141094. https://doi.org/10.1016/j.scitotenv.2020.141094

Gholami, M.; Zare-Hoseinabadi, A.; Mohammadi, M.; Taghizadeh, S.; Behzad Behbahani, A.; Amani, A. M.; Solghar, R. A. Preparation of ZnxFe3-xO4@chitosan Nanoparticles as an Adsorbent for Methyl Orange and Phenol. J. Environ. Treat. Tech. 2019, 7 (3), 245–249.

Heidarinejad, Z.; Dehghani, M. H.; Heidari, M.; Javedan, G.; Ali, I.; Sillanpää, M. Methods for preparation and activation of activated carbon: a review. Environ. Chem. Lett. 2020, 18 (2), 393–415. Springer. https://doi.org/10.1007/s10311-019-00955-0

Hu, H.; Yang, L.; Lin, Z.; Xiang, X.; Jiang, X.; Hou, L. Preparation and characterization of novel magnetic Fe3O4/chitosan/Al(OH)3 beads and its adsorption for fluoride. Int. J. Biol. Macromol. 2018, 114, 256–262. https://doi.org/10.1016/j.ijbiomac.2018.03.094

Juang, R. S.; Yei, Y. C.; Liao, C. S.; Lin, K. S.; Lu, H. C.; Wang, S. F.; Sun, A. C. Synthesis of magnetic Fe3O4/activated carbon nanocomposites with high surface area as recoverable adsorbents. J. Taiwan Inst. Chem. Eng. 2018, 90, 51–60. https://doi.org/10.1016/j.jtice.2017.12.005

Khanduri, P. Environmental Hazards and Crisis Management for Sustainable Development. Int. J. Sci. Res. 2020, 10 (11), 1386–1389. https://doi.org/10.21275/SR211126123651

Komlev, A.; Lähderanta, E.; Shevchenko, E.; Vorob’ev-Desyatovskii, N. Magnetism of purified amorphous carbon. EPJ Web Conf. 2018, 185, 04012. https://doi.org/10.1051/epjconf/201818504012

Lakherwal, D. Adsorption of Heavy Metals: A Review. Int. J. Environ. Res. Dev. 2014, 4 (1), 41–48.

Larasati, I.; Wijayanti, D.; Widhi Mahatmanti, F.; Kimia, J.; Matematika, F.; Ilmu, D.; Alam, P. Synthesis of Chitosan/Activated Carbon Composite Beads as an Adsorbent of Pb(II) and Cu(II) ions in Aqueous Solution: A Review. Indones. J. Chem. Sci. 2022, 11 (2), 190–197. https://doi.org/10.15294/ijcs.v11i2.54943

Liu, G.; Li, T.; Yang, X.; She, Y.; Wang, M.; Wang, J.; Zhang, M.; Wang, S.; Jin, F.; Jin, M.; Shao, H.; Jiang, Z.; Yu, H. Competitive fluorescence assay for specific recognition of atrazine by magnetic molecularly imprinted polymer based on Fe3O4-chitosan. Carbohydr. Polym. 2016, 137, 75–81. https://doi.org/10.1016/j.carbpol.2015.10.062

Liu, S.; Yu, B.; Wang, S.; Shen, Y.; Cong, H. Preparation, surface functionalisation and application of Fe3O4 magnetic nanoparticles. Adv. Colloid Interface Sci. 2020, 281, 102165. https://doi.org/10.1016/j.cis.2020.102165

Malega, F.; Indrayana, I. P. T.; Suharyadi, E. Synthesis and Characterization of the Microstructure and Functional Group Bond of Fe3O4 Nanoparticles from Natural Iron Sand in Tobelo North Halmahera. J. Ilm. Pendidik. Fis. Al-Biruni. 2018, 7 (2), 129–138. https://doi.org/10.24042/jipfalbiruni.v7i2.2913

Modaresi, N.; Afzalzadeh, R.; Aslibeiki, B.; Kameli, P.; Ghotbi Varzaneh, A.; Orue, I.; Chernenko, V. A. Magnetic properties of ZnxFe3−xO4 nanoparticles: A competition between the effects of size and Zn doping level. J. Magn. Magn. Mater. 2019, 482, 206–218. https://doi.org/10.1016/j.jmmm.2019.03.060

Munasir.; Kusumawati, R. P. Synthesis and Characterization of Fe3O4@rGO Composite with Wet-Mixing (ex-situ) Process. J. Phys.: Conf. Ser. 2019, 1171 (1), 012048. https://doi.org/10.1088/1742-6596/1171/1/012048

Muraleedharan, K.; Alikutty, P.; Abdul Mujeeb, V. M.; Sarada, K. Kinetic Studies on the Thermal Dehydration and Degradation of Chitosan and Citralidene Chitosan. J. Polym. Environ. 2015, 23, 1–10. https://doi.org/10.1007/s10924-014-0665-8

Nejadshafiee, V.; Islami, M. R. Adsorption capacity of heavy metal ions using sultone-modified magnetic activated carbon as a bio-adsorbent. Mater. Sci. Eng. C. 2019, 101, 42–52. https://doi.org/10.1016/j.msec.2019.03.081

Peng, B.; Song, T.; Wang, T.; Chai, L.; Yang, W.; Li, X.; Li, C.; Wang, H. Facile synthesis of Fe3O4@Cu(OH)2 composites and their arsenic adsorption application. Chem. Eng. J. 2016, 299, 15–22. https://doi.org/10.1016/j.cej.2016.03.135

Rampengan, A. M.; Tompunu Tengker, S. M. Analisa Sifat Kemagnetan Polimer Poliethylen Glycol (PEG-4000)-coated Nanopartikel Magnetite Fe3O4 Menggunakan Vibrating Sample Magnetometer (VSM). Fullerene J. Chem. 2021, 6 (2), 161–164. https://doi.org/10.37033/fjc.v6i2.376

Saputra, K.; Sunaryono, S.; Hidayat, S.; Wisodo, H.; Taufiq, A. Investigation of nanostructural and magnetic properties of Mn0.25Fe2.75O4/AC nanoparticles. Mater. Today Proc. 2021, 44, 3350–3354. https://doi.org/10.1016/j.matpr.2020.11.646

Utami, R.; Taufiq, A.; Sunaryono, S.; Nikmah. Preliminary studies on magnetite/HA/chitosan nanocomposite: Nanostructure and drug loading characteristics. AIP Conf. Proc. 2023, 2634 (1), 020035. https://doi.org/10.1063/5.0112185

Wang, H.; Shadman, F. Effect of particle size on the adsorption and desorption properties of oxide nanoparticles. AIChE J. 2013, 59 (5), 1502–1510. https://doi.org/10.1002/aic.13936

Wang, K.; Zhang, F.; Xu, K.; Che, Y.; Qi, M.; Song, C. Modified magnetic chitosan materials for heavy metal adsorption: a review. RSC Adv. 2023, 13, 6713–6736. https://doi.org/10.1039/d2ra07112f

Xiong, H.; Xu, J.; Li, S.; Xu, Y. Chromium(III) adsorption removal from acidic solutions by isomeric and tunnel-structural iron oxyhydroxides. Water Sci. Technol. 2023, 87 (5), 1140–1158. https://doi.org/10.2166/wst.2023.049

Xu, F.; Tang, Z.; Huang, S.; Chen, L.; Liang, Y.; Mai, W.; Zhong, H.; Fu, R.; Wu, D. Facile synthesis of ultrahigh-surface-area hollow carbon nanospheres for enhanced adsorption and energy storage. Nat. Commun. 2015, 6, 7221. https://doi.org/10.1038/ncomms8221

Xue, S.; Xiao, Y.; Wang, G.; Fan, J.; Wan, K.; He, Q.; Gao, M.; Miao, Z. Adsorption of heavy metals in water by modifying Fe3O4 nanoparticles with oxidized humic acid. Colloids Surf. A Physicochem. Eng. Asp. 2021, 616, 126333. https://doi.org/10.1016/j.colsurfa.2021.126333

Zhang, Y.; Zhao, M.; Cheng, Q.; Wang, C.; Li, H.; Han, X.; Fan, Z.; Su, G.; Pan, D.; Li, Z. Research progress of adsorption and removal of heavy metals by chitosan and its derivatives: A review. Chemosphere. 2021, 279, 130927. https://doi.org/10.1016/j.chemosphere.2021.130927

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c) 2026 Eclética Química

Metrics

Metrics Loading ...