Estudo da corrosão de cadinhos de SnO2-ZnO, na fusão de vidros contendo metais pesados
Main Article Content
Abstract
In this work it was studied resistance of crucibles of SnO2 doped with 1%mol of ZnO when they are submitted to thermal treatment for melting glass with heavy metals. The crucibles were obtained through the slip casting process, and the sintering temperature was 1400ºC by 4 hours. The glass composition of 50B2O3-50PbO, 60B2O3-40BaO and 66,67B2O3-33,33PbO was melted at 700ºC, 1150ºC and 700ºC respectively. All these glasses compositions were melted only one time for 1h and chilled inside the crucibles. These crucibles were analyzed by SEM-EDS.
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
The corresponding author transfers the copyright of the submitted manuscript and all its versions to Eclet. Quim., after having the consent of all authors, which ceases if the manuscript is rejected or withdrawn during the review process.
When a published manuscript in EQJ is also published in other journal, it will be immediately withdrawn from EQ and the authors informed of the Editor decision.
Self-archive to institutional, thematic repositories or personal webpage is permitted just after publication. The articles published by Eclet. Quim. are licensed under the Creative Commons Attribution 4.0 International License.
References
BANSAL, N.P.; DOREMUS, R.H. Handbook of Glass Properties. "Academic Press Inc" (1986), p.32.
DUMBAUGH W.H.; LAPP J.C. Heavy-metal oxide glasses. J. Am. Ceram. Soc., v.75, p.2315-2326, 1992.
FAGAN J.G.; AMARAKOON, V.R.W. Reliability and reproducibility of ceramic sensors .3. humidity sensors. Am. Ceram. Soc. Bul., v.72, p.119, 1993.
PERAZOLLI, L.A.; BISCARO, R.S.; GIRALDI, T.R.; LONGO, E.; VARELA, J.A.; FOSCHINI, C.R. Improved densification of SnO2 by doping with ZnO. Sint. Sci. Technol. p.117-122, 2000.
KINGERY, W.D.; BOWEN, H.K,; UHLMANN, D.R. Introduction to ceramics. 2.ed. New York: Wiley, 1973.
PARIA, M.K.; BASU, S.; PAUL, A. Enhanced sintering of tin dioxide with Additives under isothermal condition. Trans. Indian Ceram. Soc., v.42, p.90-95, 1983.
SHAW G.B. Properties of tin oxide electrodes for the glass industry. Glass Int., p.39-42, 1987.